top of page
Motor Operator

Motor Operator

Heavy-Duty Industrial Jackshaft Operator With
Solenoid Brake

The Opera-SH fills the gap between regular jackshaft and gearhead operators. This is an ultra high-end heavy-duty V-belt drive industrial operator designed for use on standard, high and vertical lift sectional doors or rolling doors and grilles.

The operator can be wall, hood, or shelf mounted on either side of the door. It incorporates a chain hoist for manual operation, with a floor level engaging device.

The operator is available with the new Electronic Control Board (BOARD 070) with or without the option of electrical control for MONITORED external entrapment protection devices (UL325-2010 compliant).

• Motor:
60Hz high starting torque, continuous-duty, single phase capacitor start or 3 phase motor, open drip proof, protected against overload. Also available with 50Hz 220V 1 phase and 380V 3 phase motor, consult inside sales.

First step in reduction 5L/B V-belt drive, additional steps by chain and sprockets. Input shaft is 3/4", supported by cast iron flanged pillow block bearings. Output shaft is 1" with 1/4" keyway, supported by cast iron flanged pillow block bearings. Output shaft speed: 41 rpm.

• Clutch:
Friction type, positioned on input shaft, easily adjustable from outside.

• Drive:
#50 roller chain with a 50B12 sprocket for the operator drive shaft. Door sprocket selected for a door travel of 6"/s to 12"/s.

• Brake:
Electrically activated drum-band type solenoid brake.

• Manual Operation:
Emergency manual chain hoist. Floor level chain hoist engaging device with electrical cut-out. An electrical interlock automatically disconnects power to the motor operator when the the chain hoist is engaged. Hoist on right is standard.

• Electrical Enclosure:
All electrical components are in a Nema 1 enclosure. Hinged electrical enclosure cover.

• Limit System:
Rotary-type oil-impregnated steel cams, commercial grade switches. Limit shaft is supported by self-lubricating bronze bushings for increased precision. Remains in time when there is a manual operation or after the motor has been removed.

• Accu-cam® Feature:
Precise and quick one-handed adjustment of the limits.

• Corrosion Protection:
Frame and control enclosure protected by baked on, long lasting enamel finish. Polymer control box cover. All shafts protected by yellow chromate coating.

• Mounting:
Wall, hood, or shelf mounted on the right or on the left of the door. For indoor use only.

• Dimensions:
Clearance: side room required 16" (460 mm)
For more details, please consult our Dimensions Drawing.

• Shipping Weight:
Approx. 96 Lbs - 44 Kg.

• Warranty:
2 Years, per section 6 of our Terms and Conditions of Sale.

• ECB Units (BOARD 070):
24VDC relaying circuit with a 40VA class II transformer, non-volatile memory. Features available: On-board radio receiver, 1.5s delay on reverse, programmable maximum run timer, mid-stop, timer to close (suspension possible from floor level), independent input loop terminal, advance close system, test buttons, reverse wiring detection and door lock sensor. Operating mode selectable on site: C2, B2, D1, E2, T or TS.

central operator 1.jfif
central operstor 2.jfif


Single-head central motor for rolling shutters


Double-head central motor for rolling shutters

tech specs.jfif


Double-head central motor for rolling shutters


Double-head central motor for rolling shutters

centrol motor 3.jfif
central motor 4.jfif
tech specs 2.jfif
bottom of page